Transformers are often used in electrical circuits to change the voltage of electricity flowing through a circuit. The coils of wire on each side of the transformer have different numbers of turns, causing the voltage out to be different from the voltage in.
Click on image for full size
Image courtesy of Wikipedia (modified by Windows to the Universe staff).
The Role of Voltage Transformers in Our Electric Power Systems
Transformers (sometimes called "voltage transformers") are devices used in electrical circuits to change the voltage of electricity flowing in the circuit. Transformers can be used either to increase the voltage (called "stepping up") or decrease the voltage ("step down").
Energy is lost in the process of transmitting electricity long distances, such as during the journey from a power plant to your home. Less energy is lost if the voltage is very high, so electrical utilities use high voltage in long-distance transmission wires. However, this high voltage is too dangerous for home use. Electrical utilities use transformers to change the voltage of electricity as it travels from the power plant to you. First, the voltage of electricity coming from the power plant is "stepped up" using transformers to the right level for long-distance transmission. Later, the voltage is stepped down before it enters your home - once again using transformers.
In order for the electrical power distribution network to function, voltages must be stepped up before power is transmitted great distances over power lines. One major problem is that power is lost between the power plant and the consumers because currents use some of the power to heat the transmission lines. The power transmitted along the line is equal to the voltage times the current. The higher the voltage the lower the current that must flow within the transmission lines to deliver the same power. Lower currents produce much less heating and much less power loss. Of course, the high voltages (needed to drive the low currents) must be stepped back down before power is supplied to our homes. Transformers are the critical elements that step up and down the voltages at each end of the line.
You might also be interested in:
Power grids were not designed to fail completely and be started-up all at once. The basic problem is that it takes energy to produce energy. Hydroelectric, steam and nuclear power plants all require energy...more
The transformer is not a power source. It functions like a lever to convert a small voltage pushing a large electric current into a large voltage pushing a small electric current or vice versa. The power...more
Space weather "storms" can cause problems for the systems we use to generate and transmit electrical power here on Earth. In extreme cases, large space weather events can even cause massive blackouts over...more
Electric currents in Earth's atmosphere can induce currents in our planet's crust and oceans. Electromagnetic induction works on a grand scale during space weather disturbances. Currents as large as a...more
There are two types of electrical currents that can flow through wires: direct current (DC) and alternating current (AC). Direct current (DC) flows in the same direction all the time through an electric...more
Radiation can damage electronic circuits and it can cause electronics to malfunction. Radiation can degrade the semiconductor materials used in electronics, reducing the useful lifetime of the electronics....more
The force of magnetism causes material to point along the direction the magnetic force points. This property implies that the force of magnetism has a direction. As shown in the diagram to the left, the...more