Shop Windows to the Universe

Science, Evolution, and Creationism, by the National Academies, focuses on teaching evolution in today's classrooms. Check out the other publications in our online store.

Transformers are often used in electrical circuits to change the voltage of electricity flowing through a circuit. The coils of wire on each side of the transformer have different numbers of turns, causing the voltage out to be different from the voltage in.
Click on image for full size
Image courtesy of Wikipedia (modified by Windows to the Universe staff).

Voltage Transformers in Electric Circuits

Transformers (sometimes called "voltage transformers") are devices used in electrical circuits to change the voltage of electricity flowing in the circuit. Transformers can be used either to increase the voltage (called "stepping up") or decrease the voltage ("step down").

A transformer is just a piece of iron with a pair of wires coiled around it - one with many more turns in the coil than the other. The coils of wire are not physically connected. The iron core is immersed in an insulating oil bath which does not conduct electricity well.

The basic physical process underlying the operation of transformers is electromagnetic induction. If a conductor, such as a copper wire, is sitting in a magnetic field that is changing, a current will flow in the conductor. This current will not be steady but will also be changing. Alternatively, if a changing current is present, it will produce a changing magnetic field. The typical current flowing in our homes and in power distribution networks changes direction 60 times every second. Around every wire, through which this current flows, a magnetic field is produced.

A transformer works only with AC (alternating current) circuits. The changing AC current enters the primary coil of wire in the transformer. A magnetic field is produced that is concentrated in the iron core of the transformer. A secondary coil of wires (also conductors) is wrapped around the iron core, not physically touching the first set of wires. The changing magnetic field produced by the first coil is experienced by the second coil and current begins to flow in these wires as well. The second coil has many more turns of wire and offers a higher resistance to the current flow than the first coil. The greater resistance means that a larger voltage drop (than is present across the first coil of wire) is produced from one end of the coil to the other. Therefore a low voltage enters the transformer and a high voltage exits, or vice versa.

Transformers are passive devices - they don't add power. Power is equal to the product of the voltage and the current. If the voltage increases the current drops. A high voltage and low current exits the transformer carrying almost the same amount of power along the transmission lines that the initial low voltage and high current did. Most transformers operate at high efficiency, under normal conditions, transmitting about 99% of the power that enters them. (About 1% of the power is lost in heating the transformer.)

Shop Windows to the Universe Science Store!

Learn about Earth and space science, and have fun while doing it! The games section of our online store includes a climate change card game and the Traveling Nitrogen game!

Traveling Nitrogen Classroom Activity Kit

Check out our online store - minerals, fossils, books, activities, jewelry, and household items!...more

The Magnetic Field

The force of magnetism causes material to point along the direction the magnetic force points. This property implies that the force of magnetism has a direction. As shown in the diagram to the left, the...more

Direct Current (DC) & Alternating Current (AC) Electricity

There are two types of electrical currents that can flow through wires: direct current (DC) and alternating current (AC). Direct current (DC) flows in the same direction all the time through an electric...more

How Space Weather Can Damage Transformers

The transformer is not a power source. It functions like a lever to convert a small voltage pushing a large electric current into a large voltage pushing a small electric current or vice versa. The power...more

Space Weather Effects on Electrical Power Systems

Space weather "storms" can cause problems for the systems we use to generate and transmit electrical power here on Earth. In extreme cases, large space weather events can even cause massive blackouts over...more

Problems Restoring Electrical Power After a Blackout

Power grids were not designed to fail completely and be started-up all at once. The basic problem is that it takes energy to produce energy. Hydroelectric, steam and nuclear power plants all require energy...more

The Effects of Radiation on Electronics

Radiation can damage electronic circuits and it can cause electronics to malfunction. Radiation can degrade the semiconductor materials used in electronics, reducing the useful lifetime of the electronics....more

Planetary Magnets

The Earth is a good example of a planetary dipole, where the lines of force point in a direction out of the South (magnetic) Pole and into the North (magnetic) Pole. Planets can also show evidence of quadrupoles...more

Windows to the Universe, a project of the National Earth Science Teachers Association, is sponsored in part is sponsored in part through grants from federal agencies (NASA and NOAA), and partnerships with affiliated organizations, including the American Geophysical Union, the Howard Hughes Medical Institute, the Earth System Information Partnership, the American Meteorological Society, the National Center for Science Education, and TERC. The American Geophysical Union and the American Geosciences Institute are Windows to the Universe Founding Partners. NESTA welcomes new Institutional Affiliates in support of our ongoing programs, as well as collaborations on new projects. Contact NESTA for more information.